TESDA Courses: 2018

Saturday, December 29, 2018

2019 TESDA Accredited Schools Pasig City Vocational Courses Offered

For those who wish to enroll in 2019 TESDA Accredited Schools Pasig City Vocational Courses Offered. In the city of Pasig, there are more than 50 schools and training centers that offer TESDA approved training courses. These schools are duly authorized thru TESDA accreditation, to offer various TESDA approved tech-voc or technical vocational courses. And to help you find the nearest school or training center in your area, we have compiled below a list showing the names of all the TESDA accredited schools in Pasig City including the technical vocational training courses offered.

Given below is the said list of 2019 TESDA accredited schools Pasig City vocational courses offered. This list was copied from the list provided by TESDA agency thru their website including the address and contact numbers of each accredited school and training center. For those who have questions o ask about the specifics of the TESDA courses offered, you may dial the corresponding telephone or mobile numbers included in this list.

2019 TESDA Accredited Schools Pasay Vocational Short Courses in TESDA

For those who are looking for 2019 TESDA Accredited Schools Pasay Vocational Short Courses in TESDA. In this posting, we will be providing you with a list showing the names of all the schools and training centers in Pasay City that offers courses in TESDA. These TESDA courses offered in Pasay City are included in the list of courses under the TVET or Technical Vocational Education and Training Program of TESDA. The TVET Program is aimed at empowering the mid-level workers with the skills that are in line with international competency standards.

Provided below is the list of 2019 TESDA accredited schools Pasay vocational short courses in TESDA. Also shown in this list is the location address of each school and training center and their telephone or mobile numbers that you may use to relay your inquiries.

2019 TESDA Accredited Schools Parañaque Short Vocational Courses Offered

If you are one of the residents of the city of Parañaque who are searching for the names of 2019 TESDA Accredited Schools Parañaque Short Vocational Courses Offered. In this posting, we will be giving our readers with the list of names of every TESDA accredited schools and TESDA training centers in the city of Parañaque with vocational training courses offered. The names in this list were provided by TESDA agency thru their website and re-posted here for your browsing convenience.

As mentioned, provided below is the list of names of 2019 TESDA accredited schools Parañaque short vocational courses offered. Also included in this list is the current address of each school and training center and their available telephone or mobile numbers in case you have questions you wish to ask about the details of the vocational courses they offer.

2019 TESDA Accredited Schools Muntinlupa City Vocational Training Courses Offered

For those of you who are residents of the city of Muntinlupa who wish to enroll in 2019 TESDA Accredited Schools Muntinlupa City Vocational Training Courses Offered. At the bottom of this introduction, we will be providing you with the list of names of every TESDA accredited schools in the city of Marikina including the TESDA approved vocational courses they offer. The names of schools and training centers on this list only offer TESDA courses that are in the list of TVET or Technical Vocational Education and Training Program of the agency.

Given below is the list of 2019 TESDA accredited schools Muntinlupa City vocational training courses offered. Also provided are the address of each school and training centers in Marikina for those who wish to personally inquire and the available telephone or mobile numbers of each school and training center for those who wish to inquire by phone.

TESDA Accredited Schools Marikina Short Vocational Courses Offered 2019

For those who are looking for TESDA Accredited Schools Marikina Short Vocational Courses Offered 2019. We have gathered and provided below a list showing the names of all the schools and training centers in the city of Marikina with TESDA registered vocational training courses offered. This list of 2019 accredited schools and training centers including the TESDA courses offered all came from the list found in TESDA website and are part of the TVET Program of the agency. The agency's TVET program is aimed at disseminating knowledge thru world-class skills training to help empower the mid-level workers with the skills to be able to compete with their local or international counterparts.

Shown below are the names of all the TESDA accredited schools Marikina short vocational courses offered 2019. Also given are their current location address and their available telephone or mobile number that you can use to relay your questions.

TESDA Accredited Schools Manila with TESDA Courses Offered 2019

For all the Manileños who are searching for TESDA Accredited Schools Manila with TESDA Courses Offered 2019. At the end of this article, we will be providing our readers with the names of all the schools and training centers in Manila that are accredited by TESDA including the vocational training courses they offer. The names of schools and training centers in this list came from the list provided by TESDA thru their website and reposted here at tesdacourse.blogspot.com for easier access and browsing. The courses offered by these TESDA accredited schools Manila are all registered under the TVET or Technical Vocational Education and Training Program of the agency.

Furnished below is the list of 2019 TESDA accredited schools Manila and the TESDA vocational courses offered. Also given are the location address of each TESDA accredited school Manila and their corresponding telephone or mobile numbers that are available to answer your inquiries.

2019 TESDA Accredited Schools with TESDA Approved Courses Offered Mandaluyong City

For those who are looking for 2019 TESDA Accredited Schools with TESDA Approved Courses Offered Mandaluyong City. We at TESDA Courses have gathered and posted below a list showing the names of all the schools and training center in the city of Mandaluyong who are TESDA accredited including the vocational training courses they offer. The courses offered by TESDA accredited schools Mandaluyong City are all part of TESDA's TVET or Technical Vocational Education and Training Program. And as mentioned, shown below are the names of all the TESDA accredited schools and training centers that offer various courses in TESDA. Also provided in this list are the address and contact numbers of each school or training center for those who wish to inquire personally or by phone.

2019 TESDA Accredited Schools with TESDA Courses Offered Malabon City

For those who are residing in the city of Malabon who are looking for 2019 TESDA Accredited Schools with TESDA Courses Offered Malabon City. We have gathered and posted below a list showing the names of all the schools and training centers in Malabon City that offers TESDA approved vocational short training courses. These courses offered in Malabon City are all included in the list of courses offered under the agency's TVET or Technical Vocational Education and Training Program. The TVET Program of TESDA is aimed at empowering our mid-level workers with the necessary skills and training to be able to compete in the local or international labor market.

Given below are the names of all the 2019 TESDA accredited schools with TESDA courses offered Malabon City. Also shown are the TESDA approved courses they offer, their current address, including their available telephone or mobile numbers for those who wish to call and inquire.

2019 TESDA Accredited Schools Short Vocational Courses Offered Makati City

For the residents of Makati City who wish to avail of the 2019 TESDA Accredited Schools Short Vocational Courses Offered Makati City. In this posting, we have compiled straight from the TESDA website, the names of every schools and training that are duly authorized by TESDA agency to offer TVET or Technical Vocational Education and Training Courses. These tec-voc courses are part of the agency's program to empower the mid-level Filipino workforce with training and skills that are in line with international competency standards to be able to compete with their foreign counterparts.

Given below is the list of the 2019 TESDA accredited schools short vocational courses offered Makati City. Also given are the TESDA approved courses they offer and their address and contact numbers for those who wish to inquire by phone.

2019 TESDA Accredited Schools Vocational Training Courses Offered Las Piñas

For those who are looking for TESDA accredited schools or TESDA courses offered in the city of Las Piñas. We at TESDA Courses have gathered and posted below a list showing the 2019 Tesda Accredited Schools Vocational Training Courses Offered Las Piñas. This list of TESDA accredited schools and the TESDA courses they offer all came from TESDA thru their website. The vocational training courses offered by each school in this list are all TESDA approved which means that the competency that you'll gain after finishing any of the short courses offered are all in line with international competency standards.

Furnished below is the list of 2019 TESDA accredited schools vocational training courses offered Las Piñas including the qualification level for each TESDA course they offer. Also given are the available contact numbers of each school or training that you may call to make inquiries.

2019 TESDA Accredited Schools Vocational Courses Offered Caloocan City

If you are a resident of Caloocan City and you are looking for a TESDA accredited school or training center that offers TESDA approved courses, then this list of 2019 TESDA Accredited Schools Vocational Courses Offered Caloocan City can help you with your search.

TESDA is the only government agency in the country who has the authority with regards to Technical Vocational Education and Training or TVET. Its programs are aimed at providing specific directions and priorities for TVET in the country. These include the designing of plans and policies for the TVET sector. And to help the government promote Technical Vocational Education and Training, the agency partners with various schools and training centers to offer tech-voc courses to Filipinos especially out of school youths and competency assessment to mid-level skilled workers.

Shown below are the names of the 2019 TESDA accredited schools Caloocan City. Also provided are their current address and contact numbers including the specific TESDA approved vocational training courses they offer.

TESDA Assessment Application and Renewal of National Certificate (NC)

For those who are looking for information about TESDA Assessment Application and Renewal of National Certificate (NC). In this posting, we will be providing you with the necessary information you need to know when applying for assessment, renewal or NC/COC, or when applying for lost or damaged National Certificate (NC)/Certificate of Competency (COC).

As part of its mandate, TESDA is charged with the assessment and certification of the competencies of the middle-level skilled workers through Philippine TVET Competency Assessment and Certification System (PTCACS). The purpose of assessment and certification is to determine whether the graduate or worker can perform to the standards expected in the workplace based on the defined competency standards. And those who successfully pass the assessment examination with be given certification. This process assures that our mid-level workers' skills are in line with international competency standards.

And to help achieve this goal, the agency has accredited assessment centers as well as competency assessors who will conduct competency assessment of those who wish to have certification.

Given below are the information you need to know if you wish to apply for assessment or renewal of National Certificate including information on what to do if you need to replace damaged or lost NC/COC or make changes to your National Certificate (NC)/Certificate of Competency (COC)

Machining Vocational Training Courses in TESDA

For those who wish to enroll in Machining course, there are few TESDA accredited schools and TESDA training centers nationwide that offers Machining Vocational Training Courses in TESDA. The said TESDA machining course has qualifications for NC I, NC II, and NC III certifications and consists of competencies that a person must achieve to set up and operate a variety of machine tools to perform precision machining operations. Specifically, this Training Regulations in Machining covers turning, milling, precision grinding, and bench work. For Machining NC I, Machining NC II, and Machining NC III, the required minimum training duration being implemented by TESDA are 374 hours, 337 hours, and 342 hours respectively. A person who has achieved certification in any of the three machining courses offered is competent to work as a:

- Machinist
- Lathe operator
- Milling machine operator
- Precision grinding machine operator
- Bench worker/fitter

Shown below are the names of all the TESDA accredited schools and TESDA training centers that offer machining vocational training courses in TESDA. Also included in this list are the specific machining course they offer and the current address and available contact numbers of each school and training centers in case you wish to inquire personally or by phone.

Free TESDA Vocational Training Courses Offered Region V

For the residents of Region V provinces of Albay, Camarines Norte, Camarines Sur, Catanduanes, Masbate, and Sorsogon who wish to avail of the Free TESDA Vocational Training Courses Offered Region V. TESDA Regional Training Center in Region V recently announced the start of enrollment for free training in various TESDA courses being offered by the agency's training center in Pili, Camarines Sur. Each of the short courses offered have 25 openings for students per class and have schedules from 8 AM to 5 PM AND 5 PM to 8 PM from Monday to Friday. The Region V training center also offers Saturday classes from 8 AM to 5 PM for those who are working. Classes will start on December 3, 2018. Given below are the details for the said free vocational training courses offered TESDA Region V. If you have questions about the free vocational courses they offer, you can visit their office in Pili, Camarines Sur.

Wednesday, November 7, 2018

Free Mechatronics Servicing NC II and Dressmaking NC II TESDA PTC Rosario Cavite

For those who wish to learn Mechatronics Servicing NC II or Dressmaking NC II, TESDA Provincial Training Center (PTC) in Rosario, Cavite is offering free courses in Mechatronics Servicing and Dressmaking. The Mechatronics Servicing NC II course is designed to develop and enhance the knowledge, skills, and attitudes of a mechatronics and automation technician, in accordance with industry standards. It covers the basic and common competencies in addition to the core competencies such as installing, configuring and testing mechatronics and automation devices/system. Dressmaking NC II course, on the other hand, consists of competencies that a person must achieve to enable him/her to draft and cut pattern; layout pattern on the material/fabric, sew material/fabric and apply finishing touches on the ladies casual apparel of the Garment sector. Casual Apparel consists of casual dress, blouse, skirt, trousers, shorts, and culottes.

For more info about the free Mechatronics Servicing NC II and Dressmaking NC II offered by TESDA PTC in Rosario, Cavite, you can refer to the image posted above.

Medical Transcription NC II Vocational Courses in TESDA

For those who wish to enroll in Medical Transcription NC II Vocational Courses in TESDA. For this year, 2018, there are a few TESDA accredited schools and training centers nationwide with TESDA registered program in Medical Transcription NC II. This TESDA approved course is designed to develop knowledge, desirable attitudes, and skills in preparing medical reports from dictated recordings made by physicians and other healthcare professionals. It covers specialized competencies such as using business technology, use medical terminology to carry out tasks, and produce text from audio transcription. For this training course, the minimum training duration required by TESDA is 396 hours.

Furnished below are the names of all the TESDA accredited schools and training centers with Medical Transcription NC II training courses offered. Also shown is the address of each school and training center and their available telephone or mobile numbers in case you wish to inquire by phone.

Aquaculture NC II Vocational Training Courses in TESDA

For those who wish to study Aquaculture, there are a few TESDA accredited schools that offer Aquaculture NC II Vocational Training Courses in TESDA. This TESDA course is designed to enhance the knowledge, desirable skills and attitudes of aquaculture NCll in accordance with industry standards. It covers core competencies in assisting in aquaculture operations, preparing and maintaining aquaculture facilities, operating fish nursery, performing fish or shrimp grow-out operations, and growing seaweeds. For this vocational course, the minimum training duration required by TESDA is 1,276 Hours

Shown below are the names of all the TESDA accredited schools with TESDA registered program in Aquaculture NC II. Also given is the address of each school and training center including their mobile or telephone numbers that you may use if you have questions you wish to ask regarding the specifics of the TESDA vocational course they offer.

2018 Tailoring NC II Vocational Training Courses in TESDA

For those who are looking for a school or training center with TESDA registered program in Tailoring NC II. We have gathered and posted below a list of names of every TESDA accredited school and TESDA training center in each region that offer 2018 Tailoring NC II Vocational Training Courses in TESDA. This TESDA registered program is designed to better improve the knowledge, skills, and attitude of a Tailor in accordance with industry standards. It also includes specialized competencies on drafting and cutting pattern, preparing and cutting materials, sewing, and applying finishing touches for casual apparel. The required minimum training duration by the agency for this Technical Vocational course is 275 hours.

Furnished below are the names of all the TESDA accredited schools and TESDA training centers nationwide with Tailoring NC II vocational training courses offered. Also provided in this list are the address of each school and training center and their available telephone or mobile numbers that you can use to relay your questions.

Motorcycle/Small Engine Servicing NC II Vocational Short Courses in TESDA

For those who are in search of schools or training centers that offer Motorcycle/Small Engine Servicing NC II Vocational Short Courses in TESDA. In this posting, we will be providing our readers with a list showing the names of all the TESDA accredited schools and TESDA training centers in each region with TESDA approved motorcycle/small engine servicing NC II training course. The motorcycle/small engine servicing NC II qualification is designed to enhance the knowledge, skills, and attitudes of an individual in the field of motorcycle/small engine servicing in accordance with industry standards. It covers core competencies such as; service engine system; service electrical system; service chassis and overhaul motorcycle engine. This course is also designed to equip the individual the basic and common knowledge, skills and attitudes of a motorcycle mechanic in accordance with industry standards. The required total length of training for this TESDA vocational course is 650 hours.

Shown below is the said list of TESDA accredited schools and TESDA training centers in each region that offer Motorcycle/Small Engine Servicing NC II vocational courses in TESDA. These names were copied from the list found on the agency's website and reposted here for your reference. This list also includes the address and contact number of the school and training center with a registered program in motorcycle/small engine servicing NC II.

Construction Painting NC II Vocational Short Courses Offered in TESDA

For those who are looking for schools or training centers with Construction Painting NC II Vocational Short Courses Offered in TESDA. We have compiled below a list showing the names of all the TESDA accredited schools and TESDA Regional and Provincial training centers with registered program in Construction Painting NC II. This training course is designed to equip an individual with operational skills in construction painting, such as preparing tools, painting materials and equipment, preparing surface for painting, performing painting work, and performing re-touching work. For the this TESDA vocational course, the minimum training duration required by the agency for construction painting NC II is 178 hours.

Given below are the names of all the TESDA accredited schools and TESDA training centers with Construction Painting NC II vocational short courses offered in TESDA. The names of the schools and training centers in this list came from the list found at the agency's website including the address and telephone or mobile numbers for those who wish to inquire personally or by phone.

Free Courses and Enrollment in TESDA Regional Training Center VII

ENROLL NOW!!!

TESDA RTC VII is now accepting enrollees/trainees for,
✔️Garments and Housekeeping Technology (Dressmaking & Housekeeping)
✔️Computer System Servicing
✔️Electronics Products Assembly
✔️Hotel and Home Technology (Domestic work & Housekeeping

Benefits: Free
Consumables, Toolkit, assessment fee, and living allowance.

How to enroll: Just visit TESDA-Regional Training Center-Cebu (Registrar's office) for Profiling Exam and Interview ON OCTOBER 24-25-26, 2018.

AFTER EXAM & INTERVIEW
Enrollment Requirements:
*Sr. High School Report card or TOR for Undergraduate in College/ Certification of passed from DepEd for ALS passers.

*Police Clearance
*Pictures (1"x1" -2pcs and passport size picture- 2pcs.colored white background with collar.
*Medical Certification - Fit to undergo training.
*Birth Certificate from NSO. (Photocopy)

Qualifications:
# 18 years old above
# High School Graduate
# ALS graduate (passer)
# College Level/ College Undergraduate

EXCEPT
# College Graduate / Degree holder

LIMITED SLOTS ONLY, FIRST COME FIRST SERVE.

Sunday, October 21, 2018

Masonry Vocational Training Courses in TESDA

For those who wish to study Masonry, there are a number of TESDA accredited schools and TESDA regional and provincial training centers nationwide that offers Masonry Vocational Training Courses in TESDA. This TESDA vocational course is among the list of TESDA courses under the TVET or Technical Vocational Education and Training Program of the agency. Given below are the levels of qualification for Masonry and the corresponding minimum training duration required by TESDA for each masonry vocational course:

Masonry NC I --- 104 hours
Masonry NC II -- 258 hours
Masonry NC III - 364 hours

Provided below is the list of TESDA accredited schools and TESDA training centers in each region with masonry vocational training courses in TESDA. This list was copied from the list found at TESDA agency website and reposted here for easier access. Also included in this list is the address of each school and training center and also their available telephone or mobile numbers that you may use to relay your inquiries regarding the details of the TESDA vocational courses they offer.

Refrigeration and Air Conditioning (RAC) Servicing Vocational Training Courses Offered in TESDA

For those who wish to study Refrigeration and Air Conditioning Servicing or RAC Servicing, we have posted below a list showing the names of all the TESDA accredited schools and TESDA training centers in each region with Refrigeration and Air Conditioning (RAC) Servicing Vocational Training Courses Offered in TESDA. These RAC servicing courses are DomRAC NC II, PACU/CRE Servicing NC III, and Transport RAC Servicing NC II. Stated below are the minimum training duration required by TESDA for each of the said RAC Servicing course:

= Domestic Refrigeration and Air Conditioning (DomRAC) Servicing NC II (480 hrs.)
= Packaged-type Air Conditioning Unit/Commercial Refrigeration Equipment (PACU/CRE) Servicing NC III (226 hrs.)
= Transport RAC (Refrigeration and Air Conditioning) Servicing NC II (212 hrs.)

Shown below is the regional list of schools and training centers that offer Refrigeration and Air Conditioning Servicing vocational short training courses. This list was provided by TESDA agency thru their website including the address of each school and training center and their available telephone or mobile numbers for those who wish to inquire by phone.

Health Care Services NC II Vocational Training Courses in TESDA

For those who wish to work in the health care sector, you can add to your list of credentials, a certificate from a TESDA accredited school that offer Health Care Services NC II Vocational Training Courses in TESDA. This training course is among the TESDA courses being offered under the Technical Vocational Education and Training or TVET program of TESDA agency which aims to equip the Filipino workforce with technical skills and training that are in line with international competency standards to help them compete in the local or international labor market. The minimum training duration required by TESDA for this vocational course is 996 hours and those who successfully achived NC II qualification in Health Care Services is qualified to work locally or abroad as a:

Health Aide
Nursing Aide
Nursing Attendant
Hospital Assistant

Given below are the names of TESDA accredited schools and training centers from the Cordillera Administrative Region or CAR up to ARMM or Autonomous Region in Muslim Mindanao. This list was provided by the agency thru their website and reposted here in TESDA Courses for easier access of those who are looking for this kind of information. Also included in this list is the address and available telephone or mobile numbers of each school or training center in case you have questions you need to ask regarding the specifics of the Health Care Services NC II vocational training course they offer.

Massage Therapy NC II Training Courses Offered

For those who wish to study Massage Therapy, we have gathered and posted below the list of all the TESDA accredited schools and TESDA training centers with Massage Therapy NC II Training Courses Offered. This massage therapy vocational course is included in the list of TESDA approved courses and is technically designed to improve the attitude, knowledge, and competency of Massage Therapy workers in compliance with massage practice standards which includes the basic, common, and core competencies in Massage Therapy NC II. For this TESDA course, the minimum training duration required by TESDA is 700 hours.

Shown below is the regional list of TESDA accredited schools and TESDA training centers with TESDA approved Massage Therapy NC II training courses offered. This list was provided by TESDA agency thru their website including the location address of each school and training center and their available telephone or mobile numbers for those who wish to inquire by phone.

TESDA Housekeeping Vocational Short Training Courses Offered

For those in search of schools or training centers with TESDA Housekeeping Vocational Short Training Courses Offered. We at TESDA Courses have gathered and posted below a list showing the names of all the TESDA accredited schools and TESDA training centers in each region that offer Housekeeping NC II and Housekeeping NC III vocational short courses. The said TESDA housekeeping courses are specifically designed to help improve the attitude, knowledge, and skills of housekeeping staff to make them at par with international competency standards. The required minimum training duration for TESDA Housekeeping NC II and TESDA Housekeeping NC III training courses are 436 hours and 76 hours respectively.

Given below is the list showing the names of all the TESDA accredited schools and TESDA training centers in each region with TESDA Housekeeping NC II or TESDA Housekeeping NC III short training courses offered. Also shown in this list is the current locationa address of each school or training center including their available telephone or mobile numbers that you may use to get in touch with the school or training center and to relay your inquiries.

TESDA Electrical Installation and Maintenance NC II Short Vocational Training Courses Offered 2018

For those who are looking for TESDA accredited schools or TESDA training centers with TESDA Electrical Installation and Maintenance NC II Short Vocational Training Courses Offered 2018. We at TESDA Courses have gathered and posted below a list showing the names of schools and training centers nationwide that offers Electrical Installation and Maintenance NC II vocational courses in TESDA. This course is designed to equip individuals with operational skills in Electrical Installation and Maintenance NC level II particularly in installing and maintaining electrical wiring, lighting and related equipment/systems in residential houses/buildings where the voltage does not exceed 600 volts. The recommended training duration for this TESDA approved course is 196 hours and those who successfully pass the certification exam in Electrical Installation and Maintenance NC II is qualified for employment locally or abroad in any of the following positions:

Building-Wiring Electrician
Residential/Commercial-Wiring Electrician
Maintenance Electrician

As mentioned, given below are the names of all the TESDA accredited schools including TESDA Regional and Provincial Training Centers with TESDA registered program in Electrical Installation and Maintenance NC II. Also provided in this list are the specific address of each school and training center including their available contact numbers in case you questions you wish to ask regarding the specifics of TESDA courses they offer.

Barista NC II Technical Vocational Training Courses Offered in TESDA

For those who wish to learn the art of preparing and serving espresso-based coffee drinks, TESDA and a number of its accredited schools and training centers are now offering qualified student applicants to enroll in Barista NC II Technical Vocational Training Courses Offered in TESDA. This TESDA short course has a minimum training duration of 178 hours and trainees or students wishing to gain entry into this qualification should possess the following requirements:

• Must have completed a 10-year basic education
• Good in oral and written communication

This TESDA vocational course is designed to enhance the knowledge, skills, and attitude in Barista NC II in accordance with industry standards. It covers core competencies in preparing espresso, texture milk, prepare and serve coffee beverages, perform basic maintenance of machines and equipment and perform basic cashiering and general control procedures.

Given below are the names of all the TESDA accredited schools and training centers with Barista NC II technical vocational training courses offered in TESDA. The names of the schools and training centers on this list were sourced from TESDA agency website including their addresses and available contact number.

Commercial Cooking Vocational Training Courses in TESDA

For those who wish to enroll in Commercial Cooking, we, at TESDA Courses, have furnished below a list of names of all the TESDA accredited schools and TESDA training centers that offer Commercial Cooking Vocational Training Courses in TESDA. This Commercial Cooking NC III Qualification has a normal training duration of 244 hours and is designed to enhance the knowledge, skills, and attitude in cooking in accordance with industry standards. It consists of competencies that a person must achieve to plan, prepare and present various hot and cold products, including specialized food items, specialty cuisines, and quantity foods and supervise a small team of cooks for guests in hotels, motels, restaurants, clubs, canteens, resorts, luxury liners and cruise ships within the company’s acceptable standards.

Given below is the list of schools and training centers with TESDA registered program in Commercial Cooking NC II, Commercial Cooking NC III, and Commercial Cooking NC IV. The names of schools and training centers in this list that offer the said vocational training courses were sourced from the list found at TESDA website including the current address and contact number of each school and training center. If you have questions to ask about the commercial cooking vocational training courses in TESDA that they offer you can visit their office personally or you can dial their telephone numbers provided.

TESDA Front Office Services NC II Short Vocational Courses Offered

For those who are looking for TESDA accredited schools or training centers with TESDA Front Office Services NC II Short Vocational Courses Offered. In this posting, we will be giving the list of names of all the schools and training centers with TESDA registered program in Front Office Services NC II. This course is designed to enhance the knowledge, skills, and attitude of Front Office personnel in accordance with industry standards. It covers the basic, common and core competencies on receiving and processing reservations, operating a computerized reservation system, providing reception and accommodation services, conducting night audit, providing club reception services and providing porter services. For this TESDA short training course, the minimum training duration is 442 hours.

Given below is the list of all the TESDA accredited schools and training centers with TESDA Front Office Services NC II short vocational courses offered. This list was gathered from the list found in TESDA website and reposted here for easier access of this who seek this information. Also provided in this list is the specific address of each school and training center including their telephone or mobile numbers in case you need to call their offices for inquiries.

Animation Vocational Courses in TESDA

For those who have drawing skills who are looking for TESDA accredited schools or TESDA training centers that offer Animation Vocational Courses in TESDA. These vocational short courses are Animation NC II, 2D Animation NC III, and 3D Animation NC III all of which are included in the list of TESDA courses being offered under the TVET or Technical Vocational Education and Training program of the agency. Stated below are the qualifications you need to possess if you wish to enroll in any of the said animation vocational courses in TESDA.

Trainee qualifications for Animation NC II

Completed at least 10 yrs. basic education or an Alternative Learning Systems (ALS) certificate of completion with grade 10 equivalent holder
Can communicate both oral and written
With drawing skills
Knows how to operate a computer
Must pass the drawing evaluation given by the institution

Trainee qualifications for 2D Animation NC III

Must possess Animation NC II certificate or have industry-based Asst. Animator/ Clean-Up and In-Between experience
Must pass the drawing test given by the institution
Able to communicate both oral and written

Trainees qualifications for 3D Animation NC III

Must possess a Certificate of Employment and/or endorsement from studio/employer, for industry practitioner
Must have NC or either COC-1 or COC-2 of Animation NC II for a non-industry practitioner
Must pass creative skills qualifying test given by the institution
Must have knowledge of at least one (1) graphic software

And finally, provided below are the names of schools and training centers with Animation Vocational Courses in TESDA. This list also includes the current location address of each school and training center including their available telephone or mobile numbers that you can dial to inquire.

Mechatronics Servicing Short Vocational Training Courses Offered in TESDA

For those who wish to enroll in Mechatronics Servicing Short Vocational Training Courses Offered in TESDA. In this posting, we will be providing our readers and followers with the necessary information regarding the Mechatronics Servicing courses offered by various TESDA accredited schools and TESDA training centers.

This TESDA course is designed to develop and enhance the knowledge, skills, and attitudes of a mechatronics and automation technician, in accordance with industry standards. It covers the basic and common competencies in addition to the core competencies such as installing, configuring and testing mechatronics and automation devices/system. The minimum training duration for each of the Mechatronics Servicing course are:

Mechatronics Servicing NC II - 158 hrs
Mechatronics Servicing NC III - 196 hrs
Mechatronics Servicing NC IV - 200 hrs

Trainees who wish to enroll in Mechatronics Servicing NC II Short Vocational Training Course should possess the following qualifications:

Must have completed at least 10 yrs. basic education or alternative learning systems (ALS) certificate of achievement with grade 10 equivalent holder
Can communicate orally and in writing
Can perform basic mathematical computations

Given below is the list of all the schools and training centers with TESDA approved Mechatronics Servicing short vocational training courses offered. Also provided in this list is the address of each school and training center including their available telephone or mobile numbers that you may use to relay your inquiries.

Scaffold Erection Vocational Short Courses Offered in TESDA

For those in the construction industry who wish to learn scaffold erection, there are a few TESDA accredited schools and TESDA training centers with Scaffold Erection Vocational Short Courses Offered in TESDA. This TESDA course has corresponding qualifications for NC II certification and requires student applicants who wish to enroll in this TESDA registered program to have the following qualifications:

With good moral character
Able to communicate orally and in writing
Physically fit and mentally healthy
Can perform basic mathematical computation and mensuration

Given below is the said list of TESDA accredited schools and TESDA regional and provincial training centers with scaffold erection vocational short courses offered in TESDA. Also provided in this list is the current location address of each school and training center including their available telephone or mobile numbers for those who wish to inquire by phone.

TESDA Approved Events Management Services NC III Training Courses Offered

For those who wish to enroll in TESDA Approved Events Management Services NC III Training Courses Offered. In this posting, we will be providing our readers and followers, with the list of all the TESDA accredited schools with events management services NC III short courses offered. The training duration for this TESDA course is 108 hours and requires student applicants to submit the following enrollment requirements:

HS Card, Diploma, NCAE FY2006-2012 High School Graduate (original & photocopy)
Transcript of Records & Diploma - College Graduate (original & photocopy)
Barangay Clearance (original and photocopy)
Birth Certificate from NSO (original and photocopy)
2 pcs. each 1x1 and 2x2 pictures (white background)

As mentioned earlier in this post, we have furnished below the list of all the TESDA accredited schools in each region with TESDA approved Events Management Services NC III Training Courses Offered. This list is arranged by region so you'll easily find the school or training center in your area that offers the said TESDA course. Also specified in this are the respective addresses of each school including their available telephone or mobile numbers that you may call to relay your inquiries.

Domestic Work NC II Short Training Courses Offered in TESDA

For those who wish to enroll in Domestic Work NC II Short Training Courses Offered in TESDA. We have gathered and posted below a list containing the names of all the TESDA accredited schools and TESDA training centers with TESDA approved Domestic Work NC II vocational courses. The required training duration for this TESDA course is 714 hours and a person who has achieved this Qualification is competent to be employed as a:

Domestic Worker
Houseboy
Housemaid
Housekeeper
Hand-launderer
Kitchen Helper
Hotel Cleaner

And to help you find the nearest TESDA accredited school with Domestic Work NC II short training courses offered in your area, we have furnished below the list of schools and training centers with TESDA registered program in Domestic Work NC II and Domestic Work NC II Mobile Training Program. The schools and training centers in this list are provided by TESDA agency including the address and available contact numbers of each school and training center in case you wish to inquire personally or by phone.

TESDA Approved Trainers Methodology Training Courses Offered

For those who wish to work in TESDA as a TVET Trainer, Training Facilitator, or Competency Assessor, there are a number of TESDA accredited schools and TESDA training centers with TESDA Approved Trainers Methodology Training Courses Offered. These TESDA Trainers Methodology vocational courses have qualifications for Level I and Level II and to qualify for enrollment a student applicant must meet the following qualifications:

Graduate of baccalaureate degree or equivalent in training/experience along the field of Technical -Vocational Education and Training
Certified at the same or higher NC Level in the qualification that will be handled (for technical trainers)
Able to communicate orally and in writing
Physically fit and mentally healthy
Proficient in quantitative and qualitative analysis
Proficient in verbal reasoning

Given below is the list of all the TESDA accredited schools and TESDA training centers with TESDA approved Trainers Methodology training courses offered. This list was taken from the list provided by TESDA including the current location address of each school and training center and their available telephone or mobile numbers that you may call if you wish to inquire.

Animal Production Technical Vocational Training Courses in TESDA

For those who wish to work abroad as a Poultry Farmer, Swine Farmer, or Dairy Farmer, TESDA together with a number of its accredited schools, are currently offering Animal Production Technical Vocational Training Courses in TESDA. These vocational short courses are included in the list of TESDA approved courses under the TVET program or Technical Vocational Education and Training program of the agency. To qualify for enrollment in the Animal Production Courses being offered, you must meet the following qualifications:

Able to read and write
With good moral character
Able to communicate, both orally and in writting
Physically fit and mentally healthy as certified by a Public Health Officer

Listed below are the possible job vacancies that a TESDA certified Animal Production course graduate may apply for:

Animal Production (Poultry-Chicken) NC II

Poultry farmer
Poultry farm worker
Poultry farm assistant
Poultry farm caretaker
Poultry service crew
Broiler raiser
Layer raiser
Poultry breeder
Flock man

Animal Production (Ruminants) NC II

Livestock Raiser/Farmer
Cattle Farm Worker (Specialist)
Goat raiser/farmer
Dairy Raiser/Farmer

Animal Production (Swine) NC II

Swine Raiser/Farmer
Swine Production Technician
Swine Farm Specialist

And to help you find the nearest accredited school in your area that offers Animal Production Technical Vocational Training Courses in TESDA. we have furnished below a list of all the schools nationwide with TESDA approved Animal Production vocational courses.

Carpentry Vocational Short Courses in TESDA

For those who wish to learn Carpentry, you can enroll in any of the Carpentry Vocational Short Courses in TESDA offered by various TESDA accredited schools and TESDA training centers nationwide. The said carpentry short courses have qualifications for NC II and NC III certifications and require all student applicants to have the following qualifications:

A holder of National Certificate Level I (for Carpentry NC II)
Good Moral Character
Ability to communicate both oral and written
Physically fit and mentally healthy
Can perform basic mathematical computation and mensuration

Besides meeting the qualifications listed above, all student applicants must also submit the following enrollment requirements:

HS Card, Diploma, NCAE FY2006-2012 High School Graduate (original & photocopy)
Transcript of Records & Diploma - College Graduate (original & photocopy)
Barangay Clearance (original and photocopy)
Birth Certificate from NSO (original and photocopy)
2 pcs. each 1x1 and 2x2 pictures (white background)

And to help you find the nearest school or training center in your area, we have furnished below the regional list of all the accredited schools and TESDA training centers that offers Carpentry NC II and Carpentry NC III vocational short courses. For inquiries regarding the TESDA courses they offer, you can dial their office telephone numbers that are included in the list.

Tourism Promotion Services NC II Technical Vocational Training Courses Offered

For those who wish to work in the tourism sector, TESDA together with a number of its accredited schools, is now offering qualified Filipinos to enroll in Tourism Promotion Services NC II Technical Vocational Training Courses Offered. The normal training duration for this TESDA vocational course is 76 hours and those who passed the assessment examination for Tourism Promotion Services NC II is qualified for employment as a:

Tourist Information Officer (LGU)
Tourism Desk Officer (LGU)
Travel Adviser/Consultant (Tourism Enterprise)
Concierge Agent (Tourism Enterprise)

Furnished below is the said list of TESDA accredited schools nationwide with Tourism Promotion Services NC II technical vocational training courses offered. This list was obtained from the list provided by TESDA agency thru their website including the addresses and contact numbers of each accredited school.

Hilot Massage Training Courses Offered in TESDA

For those who wish to learn Hilot Massage or Wellness Massage, TESDA in partnership with various schools nationwide, are offering Filipinos the chance to enroll in Hilot Massage Training Courses Offered in TESDA. This TESDA vocational course has qualification for NC II certification and requires 120 hrs. to complete the training. And to qualify for enrollment in the said TESDA training course, student applicants must have the following qualifications:

18 years old and above
Must pass the personality/aptitude test
Can communicate effectively both oral and written form
Physically, emotionally and mentally fit
Good moral character

And to help you find the nearest school or training center in your area, we have posted below the list of all the TESDA accredited schools and TESDA training center in each region with Hilot Massage training courses offered. Also provided in this list are the addresses and contact numbers of each school and training center for those who wish to inquire.

2018 Beauty Care Services Vocational Training Courses in TESDA

For those who wish to enroll in 2018 Beauty Care Services Vocational Training Courses in TESDA. We have posted below a list containing the names of all the TESDA accredited schools and TESDA training centers with Beauty Care Services courses offered. The said TESDA approved courses have corresponding qualifications for NC II and NC III certifications and trainees or students wishing to enroll in the said should possess the following requirements:

MUST be able to communicate effectively both orally and in written form
MUST be physically, emotionally, psychologically and mentally fit
MUST be able to perform basic mathematical computation

As mentioned, given below is the 2018 list of TESDA accredited schools and TESDA training centers that offer Beauty Care Services vocational training courses offered. Also included in this list are the addresses and contact numbers of each school and training center in case you intend to inquire personally or by phone.

Hairdressing NC II Vocational Training Courses in TESDA

For those who are looking for TESDA accredited schools or TESDA training centers that offers Hairdressing NC II Vocational Training Courses in TESDA. We have compiled below a list of all the schools and training centers in each region with TESDA approved hairdressing short courses offered. This training course is a TESDA registered program and requires student applicants to have the following qualifications:

Must be able to communicate effectively both orally and in written form
Must be physically, emotionally, and mentally fit
Must be able to perform basic mathematical computations (Fundamental Operations)
Must secure a medical certificate for fitness to handle chemicals

Those who successfully achieved a Certificate of Competency or COC in Hairdressing NC II is competent to be employed as:

Junior Assistant
Colorist
Permist
Make-up Artist
Haircutter
Hairstylist

Furnished below is the list of all the TESDA accredited schools and TESDA training centers in each region that offer Hairdressing NC II vocational training courses in TESDA. Also given in this list are the current addresses and contact numbers of each school and training center for those who wish to visit their offices or inquire by phone.

TESDA Machining Vocational Training Courses Offered

For those who wish to study Machining, there are a number of TESDA accredited schools and TESDA training centers with TESDA Machining Vocational Training Courses Offered. These machining short courses have corresponding qualifications for NC I, NC II, and NC III certifications. And to qualify for enrollment in any of the TESDA machining courses, you must be:

A high school graduate
With good moral character
Able to communicate
Physically and mentally fit

Given below is the alphabetical list of names of all the TESDA accredited schools and TESDA training centers with TESDA machining vocational training courses offered. Also provided in this list are the current addresses including the available telephone or mobile numbers of each school and training center in case you wish to inquire about the TESDA free training they offer.

Agricultural Crops Production Vocational Training Courses Offered

If you are from the provinces and wish to upgrade your knowledge in agriculture, then you should enroll in Agriculture Crops Production Vocational Training Courses Offered by TESDA accredited schools and TESDA training centers. The said agricultural crops production course have qualifications for NC I, NC II, and NC III certifications. And for a student enrollee to be accepted into the program, he or she must meet the following qualifications:

Able to read and write
With good moral character
Ability to communicate, both oral and written
Physically fit and mentally healthy as certified by a Public Health Officer

Given below is the regional list of TESDA accredited schools and TESDA training centers with Agricultural Crops Production vocational training courses offered. Also given in this list are the addresses and available contact of each school and training center for those who wish to inquire personally or by phone.

2018 Contact Center Services Vocational Training Courses in TESDA

For those who are looking for TESDA accredited schools that offer 2018 Contact Center Services Vocational Training Courses in TESDA. In this posting, we will be providing you with a list of all the schools and training centers in each region that has TESDA approved Contact Center Services vocational course. This training course has qualification for NC II certification and requires student applicants to meet the following qualifications:

Must have completed at least 10 yrs. basic education or an ALS certificate of achievement with grade 10 equivalent holder
Can communicate in English either oral or written

As mentioned, furnished below is the list of all the TESDA accredited schools in each region with 2018 contact center services NC II vocational training courses offered. Also included in the list is the current address of each school including their telephone or mobile numbers that you may call to relay your inquiries.

2018 Bookkeeping Vocational Short Courses in TESDA

For those who wish to learn Bookkeeping, TESDA together with a many TESDA accredited schools, are currently offering 2018 Bookkeeping Vocational Short Courses in TESDA. This Bookkeeping training course has corresponding NC III qualification which consists of competencies that a person must achieve to enable him/her to journalize transactions, post transactions, prepare trial balance, prepare financial reports, and review internal control system. And to qualify for enrollment to the said TESDA vocational course, student applicants must meet the following qualifications:

At least high school graduate
Must be able to communicate effectively both orally and in written form
Must be physically, emotionally, psychologically, and mentally fit
Must be able to perform basic mathematical computations

Furnished below is the regional list of TESDA accredited schools and TESDA training centers nationwide with 2018 Bookkeeping vocational short courses offered. Also provided in this list are the specific address and contact numbers of each school and training centers for those who wish to inquire personally or by phone.

TESDA Approved Welding Vocational Training Courses Offered ARMM

For those living in any of the ARMM provinces of Basilan, Maguindanao, Sulu, or Tawi-Tawi who are looking for TESDA accredited schools or TESDA training centers with TESDA Approved Welding Vocational Training Courses Offered ARMM. The said welding short courses offered in Autonomous Region in Muslim Mindanao is Shielded Metal Arc Welding (SMAW) NC I and NC II which requires student enrollees to have the following qualifications:

Must have completed at least 10 years basic education or holder of an ALS grade 10 certificate
Can communicate in oral and written language
Can perform basic mathematical computations

Here are the documentary requirements to be submitted during enrollment:

Two (2) pcs. of 1x2 and 2x2 pictures (white background)
High School Card or Diploma for high school graduates
ALS grade 10 certificate for ALS graduates
Original and photocopy of Transcript of Records and Diploma for college graduates
Barangay Clearance (original and photocopy)
Birth Certificate from NSO (original and photocopy)

Provided below is the list of TESDA accredited schools and TESDA training centers with welding short courses offered. Also provided in this list are the current address and available telephone or mobile numbers for those who wish to inquire by phone.

TESDA Welding Vocational Short Courses CARAGA

If you are a resident of Agusan del Norte, Agusan del Sur, Surigao del Norte, or Surigao del Sur in CARAGA Region and you are looking for schools or training centers that offer TESDA Welding Vocational Short Courses CARAGA. The welding vocational courses available in CARAGA are Gas Metal Arc Welding (GMAW), Shielded Metal Arc Welding (SMAW), and Gas Tungsten Arc Welding (GTAW) all of which are TESDA registered program for each of the TESDA accredited school and TESDA training center in this list. To qualify for this vocational training courses, student applicants must have the following qualifications:

Must have completed at least 10 years basic education or holder of an ALS grade 10 certificate
Can communicate in oral and written language
Can perform basic mathematical computations

Besides the qualifications mentioned above, student applicants must also submit the following documentary requirements when enrolling:

Two (2) pcs. of 1x2 and 2x2 pictures (white background)
High School Card or Diploma for high school graduates
ALS grade 10 certificate for ALS graduates
Original and photocopy of Transcript of Records and Diploma for college graduates
Barangay Clearance (original and photocopy)
Birth Certificate from NSO (original and photocopy)

Furnished below is the list of TESDA accredited schools and TESDA training centers with TESDA welding vocational short courses CARAGA. This list was adopted from the list provided by the agency including the addresses and contact numbers of each school and training center. For those who have questions regarding the courses offered by a specific school or training center, you can personally inquire at their offices or dial their telephone or mobile numbers given in this list.

Electronics Products Assembly and Servicing Vocational Courses in TESDA

If you wish to add Electronics Products Assembly and Servicing NC II Certificate to your list of credentials, you can start by enrolling in Electronics Products Assembly and Servicing Vocational Courses in TESDA. This TESDA approved course is being offered by TESDA accredited schools and TESDA training centers nationwide and to qualify for enrollment, student applicants must meet the following qualifications:

Must have completed at least 10 yrs. basic education or an ALS grade 10 certificate of rating holder
Can communicate in oral and written language
Can perform basic mathematical computations

The said electronics products assembly and servicing courses offered is included in the list of vocational courses under the TVET or Technical Vocational Education and Training program of the agency whose aim is to supplement the country's future skills requirements.

Shown below is the regional list of schools and training centers with TESDA approved electronics products assembly and servicing NC II vocational courses offered. This list was provided by TESDA agency website which also provided the corresponding addresses of each school and training center including their telephone or mobile numbers for those who wish to inquire.

Region XII Welding Vocational Short Courses Offered

For the residents of the province of Cotabato, South Cotabato, Sultan Kudarat, or General Santos City who are looking for TESDA accredited schools and TESDA training centers with Region XII Welding Vocational Short Courses Offered. We have compiled and posted below a list showing the names of all the schools and training centers in Region XII or SOCCSKSARGEN that offers Shielded Metal Arc Welding (SMAW), Gas Tungsten Arc Welding (GTAW), or Gas Metal Arc Welding (GMAW). These welding vocational courses are part of the TVET or Technical Vocational Education and Training program of the agency and to qualify for enrollment, student applicants must have the following qualifications:

At least 18 years old
High School graduate
Able to perform basic mathematical computations
Can communicate in basic English either oral or written

Provided below is the list of TESDA accredited schools and TESDA training centers in Region XII with TESDA approved welding courses offered. Also given are the current addresses of each school and training center including their telephone or mobile numbers that you may use to relay your inquiries.

Region XI Welding Vocational Training Courses Offered

For those living in the provinces of Compostela Valley, Davao del Norte, Davao del Sur, Davao Occidental, and Davao Oriental who wish to enroll in Region XI Welding Vocational Training Courses Offered. We have assembled below a list of all the TESDA accredited schools and TESDA training centers in Region XI that offers Shielded Metal Arc Welding (SMAW) and Gas Metal Arc Welding (GMAW). These welding short courses are part of the agency's TVET program which aims to fill the country's future skills requirements. To be eligible for enrollment in any of the said welding vocational courses, student applicants must be:

At least 18 years old
High School graduate
Able to perform basic mathematical computations
Can communicate in basic English either oral and written

Furnished below is the list of TESDA accredited schools and TESDA training centers in Region XI that offer SMAW NC I and NC II and GMAW NC I and NC II short courses in TESDA.

Region X Welding Vocational Training Courses

For the residents of any of the Region X provinces of Bukidnon, Lanao del Norte, Misamis Occidental, and Misamis Oriental, who wish to enroll in Region X Welding Vocational Training Courses being offered by TESDA accredited schools and TESDA training centers. We have furnished below, a list of all the schools and training centers that offer Shielded Metal Arc Welding (SMAW), Gas Tungsten Arc Welding (GTAW), and Gas Metal Arc Welding (GMAW). These welding short courses are included in the list of TESDA registered programs and to qualify for enrollment, you must be at least a high school graduate, can perform basic computations, and able to communicate in English. Besides the qualifications mentioned, you must also submit the following documents upon enrollment:

High School Card or Diploma for high school graduates
Transcript of Records and Diploma for college graduates (original and photocopy)
PSA Birth Certificate (original and photocopy)
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x2 and 2x2 pictures (white background)

As stated, given below is the list of all the TESDA accredited schools and TESDA training centers with welding short courses offered in TESDA. Also specified in this list is the specific welding course they offer, the current address of each school and training center, and the telephone or mobile numbers that you may use to relay your inquiries.

REGION IX Welding Vocational Training Courses in TESDA

If you are a resident of any of the Region IX provinces of Zamboanga del Norte, Zamboanga del Sur, or Zamboanga Sibugay, and you wish to enroll in Region IX Welding Vocational Training Courses in TESDA, then you'll find this post useful. At present, TESDA agency together with a number of TESDA accredited schools, are now offering residents of any of the Region IX provinces, the chance to upgrade their skills thru various welding vocational courses. The welding courses offered are Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW). Those who wish to enroll in any of the said welding courses offered must be at least high school graduate, can communicate in English, and able to perform basic math computations. Besides the qualifications mentioned above, an enrollee must also submit the following documents:

PSA Birth Certificate (original and photocopy)
High School Card or Diploma for high school graduates
Transcript of Records and Diploma for college graduates (original and photocopy
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x2 and 2x2 pictures (white background)

Shown below is the list of TESDA accredited schools in the provinces of Zamboanga del Norte, Zamboanga del Sur, and Zamboanga Sibugay that offers welding vocational training courses. Also shown in this list are the addresses including the contact numbers of each school or training center for those who to inquire by phone.

2018 Caregiver Vocational Training Courses Offered

For those who are looking for the regional list of TESDA accredited schools with 2018 Caregiver Vocational Training Courses Offered. We have gathered and posted below are the names of all the schools and training centers in each region that offers Caregiving NC II short courses. This TESDA course is a registered program for each of the school and training center on this list. And to qualify for enrollment in the said caregiver course in TESDA, student applicants must have the following qualifications:

Can communicate both in oral and written
Can perform basic mathematical computation
Physically and mentally fit
With good moral character

The qualifications listed above doesn't include qualifications like educational attainment, appropriate work experience, and others, that may be required of the students by the school or training center offering the TVET program.

Furnished below is the list containing the names of all the TESDA accredited schools in each region with 2018 caregiver vocational training courses offered. This list was provided by TESDA agency thru their website and reposted here for easier access. Also included in this list are the respective addresses of each school and training center including their telephone or mobile numbers for those who wish to inquire by phone.

Region VIII Welding Vocational Training Courses Offered

In the Region VIII provinces of Biliran, Eastern Samar, Leyte, Northern Samar, Samar, and Southern Leyte, TESDA accredited schools and TESDA training centers are now offering the residents of the said provinces, the opportunity to learn welding skills thru Region VIII Welding Vocational Training Courses Offered. The welding courses offered in the said provinces are Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW). And to be able to enroll in any of the said welding vocational course, you must be at least high school graduate, can communicate in English, and able to perform basic math computations. Besides the qualifications mentioned, you also need to submit the following documents:

PSA Birth Certificate (original and photocopy)
High School Card or Diploma for high school graduates
Transcript of Records and Diploma for college graduates (original and photocopy
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x2 and 2x2 pictures (white background)

Shown below is the list of all the TESDA accredited schools and TESDA training centers in Region VIII that offers welding vocational short courses. Also provided in this list are the respective addresses of each school and training center, the specific welding courses they offer, and their available contact numbers in case you have questions you wish to ask regarding the specifics of the welder course they offer.

Region VII Welding Vocational Short Courses in TESDA

In Region VII, TESDA together with TESDA accredited schools, are now offering the residents of the provinces of Bohol, Cebu, and Negros Oriental, to enroll in Region VII Welding Vocational Short Courses in TESDA. The welding courses offered have Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), and Flux Cored Arc Welding (FCAW), all of which are TESDA approved courses and included in the TVET program of the agency. To qualify for any of the said welding vocational course, all student applicants must be:

a high school graduate
can do basic math computations
can communicate in English orally and in writing

If you meet all the qualifications listed above, you must prepare the following enrollment requirements for submission to the school or training center:

PSA Birth Certificate (original and photocopy)
High School Card or Diploma for high school graduates
Transcript of Records and Diploma for college graduates (original and photocopy
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x2 and 2x2 pictures (white background)

Furnished below are the names of the TESDA accredited schools and TESDA training centers in the Region VII provinces of Bohol, Cebu, and Negros Oriental that offers welding vocational short courses in TESDA. Also included in the list are the corresponding addresses and contact numbers of each school and training center for those who wish to inquire personally or by phone.

TESDA Bartending Vocational Training Courses Offered 2018

For those who are looking for schools and training centers with TESDA Bartending Vocational Training Courses Offered 2018. In this posting, we will be providing you with a list containing the names of all the TESDA accredited school and training centers that offer Bartending vocational short courses. Trainees or students who wish to enroll in this TESDA approved course should possess the following qualifications:

18 years old
High School graduate
Able to perform basic mathematical computations
Can communicate in basic English either oral and written

Listed below are the names of all the TESDA accredited schools and training centers with Bartending short courses offered. Also furnished in this list are the addresses and telephone or mobile numbers of each school and training center for those who wish to inquire.

Region VI Welding Vocational Courses Offered in TESDA

If you are a resident of the province of Aklan, Antique, Capiz, Guimaras, Iloilo, or Negros Occidental and you are looking for accredited schools or TESDA training centers that offer Region VI Welding Vocational Courses Offered in TESDA, then let this post be your guide.

For this year, 2018, TESDA together with a number of its accredited schools and training centers, are offering qualified Filipinos the opportunity to enroll in various welding vocational short training courses. And to qualify for enrollment in the said TESDA course, you must be a high school graduate, can do basic math computations, and able to communicate in English. Also, you need to submit all the following documents before you can be accepted into the program:

PSA Birth Certificate (original and photocopy)
Transcript of Records and Diploma for college graduates (original and photocopy
High School Card or Diploma for high school graduates
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x2 and 2x2 pictures (white background)

Furnished below is the list of TESDA accredited schools and TESDA training centers in the Region VI provinces of Aklan, Antique, Capiz, Guimaras, Iloilo, and Negros Occidental, that offers welding short courses. Also given are the current addresses and contact numbers of each school or training for those who wish to inquire personally or by phone.

Region V Welding Courses Vocational Training

For the residents of Region V provinces of Albay, Camarines Norte, Camarines Sur, Catanduanes, Masbate, and Sorsogon, who wish to avail of Region V Welding Courses Vocational Training. We have gathered and compiled below a list of TESDA accredited schools and TESDA training centers in Region V that offers Shielded Metal Arc Welding (SMAW), Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW). These TESDA courses are part of the agency's TVET Program or Technical Vocational Education and Training whose objective is to make sure that the mid-level Filipino workers are armed with the necessary skills and knowledge to compete in the local or international labor market. And to be accepted into the program, a student applicant needs to be a high school graduate, can do basic math computations, and can communicate in English orally and in writing. A student applicant must also be able to submit all of the following enrollment requirements:

PSA Birth Certificate (original and photocopy)
Transcript of Records and Diploma for college graduates (original and photocopy
High School Card or Diploma for high school graduates
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x2 and 2x2 pictures (white background)

Furnished below is the list of TESDA accredited schools and TESDA training centers with Region V welding courses vocational training. This list was obtained from the list provided by the agency thru their website tesda.gov.ph. Also provided in this list is the corresponding address and contact numbers of each school and training center for those who wish to ask questions or inquire about the specifics of the short courses they offer.

Note: The names, address, and contact numbers that are colored blue are TESDA training centers that offer free welding vocational short courses.

Computer Systems Servicing Vocational Training Courses in TESDA

If you wish to enroll in Computers Systems Servicing Vocational Training Courses in TESDA, we have provided you below with a list of all the TESDA accredited schools and TESDA training centers that offer computer systems servicing short courses. The said training course is part of the agency's program which is aimed at empowering the Filipino workforce with globally competitive skills to compete in the local or international labor market. This TESDA vocational course has corresponding qualifications for NC II certification and a person who has achieved this Qualification is competent to be employed as a:

Computer Assembler
Computer Service Technician
Network Technician
Computer Maintenance Technician

To gain entry to the said computer systems servicing vocational training course, trainees or students should possess the following qualifications:

Can communicate either oral and written
Must pass the trainability/aptitude test

The said qualifications do not include specific institutional requirements such as educational attainment, appropriate work experience, and others that may be required of the trainees by the school or training center delivering the TVET program.

Furnished below is the regional list of TESDA accredited schools and TESDA training centers with computer systems servicing courses offered. Also provided are the addresses and contact details of each school and training centers in case you wish to inquire

TESDA Welding Vocational Courses Offered in Region IV-B

In the provinces of Marinduque, Occidental Mindoro, Oriental Mindoro, Palawan, and Romblon, there are schools and training centers with TESDA Welding Vocational Courses Offered in Region IV-B. These schools and training centers are all TESDA accredited and offers Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), or Gas Tungsten Arc Welding (GTAW). These welding short courses are among the list of competency based curriculum promulgated by the agency. And to be able to enroll in any of these welding vocational courses, you must be at least 18 years old, a high school graduate, and able to submit the following enrollment requirements:

- High School Card or Diploma (for high school graduates)
- Original and photocopy of Transcript of Records and Diploma (for college graduates)
- Barangay Clearance (original and photocopy)
- Birth Certificate from PSA (original and photocopy)
- Two (2) pcs. of 1x1 and 2x2 pictures (white background)

Furnished below is the list of all the TESDA accredited schools in Region IV-B that offers welding vocational courses. Also included in this list are the specific addresses and available contact numbers of each TESDA accredited school in case you inquire about the specifics of the welding short courses they offer.

Region IV-A Welding Vocational Short Courses in TESDA

For the residents of any of the Region IV-A provinces of Batangas, Cavite, Laguna, Quezon, or Rizal who are looking for schools and training centers with Region IV-A Welding Vocational Short Courses Offered in TESDA. We have gathered and compiled below, a list of all the TESDA accredited schools and TESDA Regional and Provincial training centers in each Region IV-A provinces, with TESDA approved welding vocational courses offered for 2018. The welding courses offered in the said provinces are Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), and Flux-Cored Arc Welding (FCAW), all of which are included in the list of competency based curriculum of the agency. And to qualify for enrollment in any of the said welding courses, you must be at least 18 years old and must submit the following requirements:

- High School Card or Diploma (for high school graduates)
- Original and photocopy of Transcript of Records and Diploma (for college graduates)
- Birth Certificate from NSO (original and photocopy)
- Barangay Clearance (original and photocopy)
- Two (2) pcs. of 1x1 and 2x2 pictures (white background)

As mentioned, given below is the 2018 list of all the TESDA accredited schools and TESDA training centers in the provinces of Region IV-A. Also provided are their current addresses including their telephone or mobile numbers in case you wish to inquire by phone.

Region III Welding Vocational Training Courses Offered

For the residents of the provinces of Aurora, Bataan, Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales who are looking for TESDA accredited schools or TESDA training centers with Region III Welding Vocational Training Courses Offered. These welding vocational courses SMAW, GMAW, and GTAW, which are all part of TESDA agency's TVET or Technical Vocational Education and Training program that is being delivered by TTI's or TESDA Technology Institutions which is composed of 125 schools, regional, provincial, and specialized training centers nationwide. And for those who wish to enroll in any of the said welding courses, you must be at least 18 years old and able to submit all the following enrollment requirements:

- Birth Certificate from NSO (original and photocopy)
- High School Card or Diploma (for high school graduates)
- Original and photocopy of Transcript of Records and Diploma (for college graduates)
- Barangay Clearance (original and photocopy)
- Two (2) pcs. of 1x1 and 2x2 pictures (white background)

Given below are the names of TESDA accredited schools and TESDA training centers with welding vocational training courses offered. Also given are the addresses of each school or training center including their telephone or mobile numbers for those who wish to inquire by phone.

Note: The names of training centers that are colored blue are TESDA regional or provincial training centers that offers FREE VOCATIONAL TRAINING COURSES.

Region II Welding Vocational Short Courses Offered in TESDA

In the provinces of Cagayan, Isabela, Nueva Vizcaya, and Quirino, there are few accrdited schools and training centers with Region II Welding Vocational Short Courses Offered in TESDA. These welding training courses are for Shielded Metal Arc Welding (SMAW) NC I and NC II and Gas Metal Arc Welding (GMAW) NC II. This list of training courses were compiled from the list provided by TESDA thru their website. And for those who wish to enroll in any of the mentioned welding courses, you must be at least 18 years old and able to submit all of the following enrollment requirements:

Two (2) pcs. of 1x1 and 2x2 pictures (white background)
Birth Certificate from NSO (original and photocopy)
High School Card or Diploma for high school graduates
Original and photocopy of Transcript of Records and Diploma for college graduates
Barangay Clearance (original and photocopy)

Specified below are the names of the TESDA accredited schools and TESDA training centers with Region II welding vocational short courses offered in TESDA. Also provided in this list are the addresses of each school and training center including their contact numbers in case you have questions to ask about the welding short courses they offer.

Note: The training center whose name, address, and contact numbers that is colored blue is a TESDA training center that offers free welding vocational course.

Region I Welding Vocational Courses in TESDA

In the Region I provinces of Ilocos Norte, Ilocos Sur, La Union, and Pangasinan, residents who wish to acquire welding skills may enroll in a variety of Region I Welding Vocational Courses in TESDA. These TESDA short courses are part of the TVET or Technical Vocational Education and Training Program of TESDA which aims to empower the Filipino workforce with skills that are in line with international competency standards. Among the welding courses being offered in Region I are Shielded Metal Arc Welding, Gas Metal Arc Welding, and Gas Tungsten Arc Welding. For any of these TESDA welding courses, the minimum age of students to be accepted for enrollment is 18 years old and must be able to submit all of the following enrollment requirements:

Birth Certificate from NSO (original and photocopy)
High School Card or Diploma (for high school graduates)
Original and photocopy of Transcript of Records and Diploma (for college graduates)
Barangay Clearance (original and photocopy)
Two (2) pcs. of 1x1 and 2x2 pictures (white background)

Given below is the list of all the TESDA accredited schools and TESDA training centers in Region I including their address, contact numbers, and specific welding vocational course they offer. If you have questions to ask regarding the training courses they offer, you can contact the training center directly using their telephone or mobile numbers included in this list.

Note: The training centers whose names are colored blue are TESDA training centers that offers free vocational short courses.

TESDA Training Centers with Free Vocational Short Courses Offered

For those who are looking for TESDA Training Centers with Free Vocational Short Courses Offered, we have compiled below a list of the regional and provincial TESDA training centers and the free training courses they offer. This list was compiled from the information provided by TESDA agency and their regional and provincial websites. For each TESDA courses offered, the minimum age requirement differs and the set of documentary requirements to be submitted upon enrollment are the following:

Two (2) pcs. of 1x2 and 2x2 pictures (white background)
High School Card or Diploma for high school graduates
Original and photocopy of Transcript of Records and Diploma for college graduates
Barangay Clearance (original and photocopy)
Birth Certificate from NSO (original and photocopy)

For more information or questions regarding the specifics of the free vocational short courses offered you can visit the regional or provincial office in your area or you can dial their telephone or mobile numbers included in this list.

TESDA Approved Welding Short Courses Offered Cordillera Administrative Region

If you are a resident of the provinces of Abra, Benguet, Ifugao, Kalinga, and Mountain Province and you wish to enroll in TESDA Approved Welding Short Courses Offered Cordillera Administrative Region or CAR. For this TESDA vocational training course, you can choose from Shielded Metal Arc Welding (SMAW), Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), or Gas Tungsten Arc Welding (GTAW). And to qualify for this TESDA registered program, you must be at least 18 years old, a high school graduate, and able to submit the following enrollment requirements:

High School Card or Diploma for high school graduates
Original and photocopy of Transcript of Records and Diploma for college graduates
Birth Certificate from NSO (original and photocopy)
Two (2) pcs. of 1x1 and 2x2 pictures (white background)
Barangay Clearance (original and photocopy)

Given below is the list of TESDA accredited schools and TESDA training centers in the provinces of Abra, Benguet, Ifugao, Kalinga, and Mountain Province with welding short courses offered in CAR or Cordillera Administrative Region. Also given are their corresponding addresses and contact numbers for those who get in touch with their offices and inquire.

2018 TESDA Welding Vocational Courses Offered NCR

In NCR or National Capital Region, you may enroll in a variety of welding courses being offered by a number of TESDA accredited schools and TESDA training centers. This 2018 TESDA Welding Vocational Courses Offered NCR are Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), and Flux-Cored Arc Welding (FCAW). All these welding short courses are included in the list of TESDA registered programs and requires student applicants to have the following qualifications:

Must be 18 years old and above
At least high school graduate

If you meet the qualifications specified for the said welding vocational courses, you must prepare the following enrollment requirements for submission:

Two (2) pcs. of 1x1 and 2x2 pictures (white background)
High School Card or Diploma for high school graduates
Original and photocopy of Transcript of Records and Diploma for college graduates
Barangay Clearance (original and photocopy)
Birth Certificate from NSO (original and photocopy)

Given below are the names of TESDA accredited schools and training centers with 2018 TESDA welding vocational courses offered in NCR. This list was provided by TESDA agency website and also includes the current addresses and contact numbers of each school and training center for those who wish to inquire.

Food and Beverage Services Vocational Short Courses Offered

If you are currently employed or wish to be employed in the food service industry, then it advisable for you to enroll in Food and Beverage Services Vocational Short Courses Offered by TESDA accredited schools and training centers so you can have TESDA certifications to add to your credentials. The said F and B services training course is part of the TVET program of the agency whose main objective to empower the Filipino workforce by making them more competitive in the international or local labor market. And for you to qualify for the said enrollment in the said food and beverage services vocational course, you must meet the following qualifications:

• Must be a High School graduate
• Able to accomplish basic mathematical computations
• Must have basic English oral and written communication skills

Given below is the list of TESDA accredited schools and TESDA training centers nationwide with food and beverage services vocational short courses offered. Also indicated in this list are the addresses and telephone or mobile number of each school and training center that you may use if you have questions to ask regarding the TESDA courses they offer.

Plumbing Vocational Courses in TESDA

For those who wish to enroll in Plumbing Vocational Courses in TESDA, we have posted below, a list containing the names of all the TESDA accredited schools and TESDA training centers nationwide that offers Plumbing vocational training courses. This vocational training course has qualifications for NC I, NC II, and NC III certifications and were compiled from the list provided by TESDA agency website. And to qualify for enrollment in the said Plumbing vocational course, all enrolleess must be:

• At least Junior High School (Grades 9 & 10) level or graduate;
• Able to perform basic mathematical computation; and
• Able to communicate orally and in writing.

This qualifications listed above does not include specific institutional requirements such as written entrance exam, appropriate work experience, and other that may be required of the trainees by the school or training center delivering TVET program.

Given below is the list of accredited schools and training centers nationwide that offers Plumbing vocational courses in TESDA. Also included in this list are the current addresses and available contact numbers of each school and training center in case you have questions to ask about the TESDA courses they offer.

2018 Pipefitting Courses Offered in TESDA

For those who wish to learn Pipefitting skills that are in line with international competency standards, you can enroll in a TESDA accredited school or TESDA training center with 2018 Pipefitting Courses Offered in TESDA. This Pipefitting course have a corresponding qualification for NC II certification and requires enrollees to have the following qualifications to be accepted in the program:

• Can communicate both orally and in writing
• Can perform basic mathematical computation
• Good moral character; and
• Physically and mentally fit

And to help you easily find the nearest school or training center in your area that offers Pipefitting courses, we have given below the names and addresses of all the TESDA accredited schools and TESDA training centers nationwide. This list also includes the available contact numbers of each school and training center in case you wish to inquire about the specifics of the Pipefitting course they offer.

Visual Graphic Design Courses in TESDA

For those with artistic talents who wish to enroll in Visual Graphic Design Courses in TESDA. Just recently, TESDA started offering the latest addition to TESDA courses, the Visual Graphic Design NC III course. This TESDA vocational course is perfect for those who are planning a career as a:

• Visual graphic artist
• Creative/Art director
• Layout artist
• Graphic designer
• Web designer
• Visual graphic multimedia artist
• Booth and product/window display designer

To qualify for enrollment in this visual graphic design courses in TESDA, you must meet the following qualifications:

• can communicate either oral or written
• must be physically and mentally fit to undergo training
• high school graduate or equivalent
• with basic computer skills; and
• must pass the aptitude and artistic/talent determination test

Given below is the list of TESDA accredited schools with approved Visual Graphic Design Courses in TESDA. Also given in this list is the current location address and contact numbers of each school and training center for those who wish to inquire.

2018 Automotive Servicing Courses in TESDA

For this year 2018, TESDA together with a number of its accredited schools and training centers, are now offering 2018 Automotive Servicing Courses in TESDA. This TESDA vocational course have qualifications for NC I, NC II, NC III, and NC IV certifications and is being offered to Filipinos who are interested in acquiring automotive servicing skills that are in line with international competency standards.

Given below is the list of TESDA accredited schools and TESDA training centers with 2018 automotive servicing courses in TESDA. This list is arranged by region and names of schools are arranged alphabetically so you easily find what you are looking for. Also provided are the current address and contact numbers of each school and training center in case you wish to visit their respective offices or inquire by phone.

Technical Drafting Vocational Courses in TESDA

For those who wish to enroll in Technical Drafting Vocational Courses in TESDA. We at TESDA Courses have posted below the list containing the names of all the TESDA accredited schools and TESDA training centers with TESDA registered programs in Technical Drafting. The said TESDA training course have a corresponding NC II qualification and requires enrollees to possess the following qualification:

Ability to communicate
Physically fit and mentally healthy
Can perform basic mathematical computation and mensuration
Good moral character

Given below is the said list of accredited schools and training centers with TESDA approved courses in Technical Drafting. Also provided in this list are the current address of each school and training center including their respective telephone or mobile numbers for those who wish to inquire by phone about the specifics of the vocational training courses they offer.

2018 Security Services Courses in TESDA

For those who wish to work as Security Guards and are looking for schools and training centers that offers 2018 Security Services Courses in TESDA. Posted below is the 2018 list of TESDA accredited schools and training centers with TESDA registered programs security services. The said TESDA training course is for NC I and NC II qualifications and trainees or students wishing to enroll in this course should possess the following qualifications:

Security Services NC I

Filipino citizen
High School Graduate;
Physically and mentally fit
Not less than eighteen (18) years of age nor more than fifty (50) years of age (for new applicants and SGs in non-supervisory position)
Has undergone a pre-licensing training course or its equivalent

Security Services NC II

Must possess a Private Security License/Special Bank Receipt (SBR) authenticated by the Personnel Licensing Section – SAGSD-PNP to exercise profession
Must possess Pre-Licensing Training Certificate or its equivalent duly authorized by the Private Security Training Management Branch (PSTMB-SAGSD-PNP) under Section 3 Rule V of the 2003 Revised Rules and Regulations Implementing RA 5487 As Amended
Ability to communicate
Physically fit and mentally healthy as certified by a Public Health Officer

For security services NC I, the nominal training duration is 106 hours and 223 hours for security services NC II. Provided below are the names of all the TESDA accredited schools and training centers nationwide with security services courses offered. Also specified in the list are the current location address and available contact numbers of each training center in case you wish to inquire personally at their office or by phone.

Saturday, December 29, 2018

Wednesday, December 26, 2018

Monday, December 24, 2018

Sunday, December 23, 2018

Sunday, December 16, 2018

Saturday, December 15, 2018

Thursday, December 13, 2018

Monday, December 10, 2018

Saturday, December 8, 2018

Friday, December 7, 2018

Thursday, December 6, 2018

Friday, November 30, 2018

Wednesday, November 21, 2018

Wednesday, November 7, 2018

Monday, November 5, 2018

Thursday, November 1, 2018

Monday, October 29, 2018

Saturday, October 27, 2018

Tuesday, October 23, 2018

Sunday, October 21, 2018

Tuesday, October 9, 2018

Friday, October 5, 2018

Sunday, September 30, 2018

Saturday, September 22, 2018

Wednesday, August 15, 2018

Friday, August 10, 2018

Wednesday, August 8, 2018

Sunday, August 5, 2018

Friday, August 3, 2018

Wednesday, August 1, 2018

Saturday, July 28, 2018

Wednesday, July 25, 2018

Saturday, July 21, 2018

Tuesday, July 17, 2018

Thursday, July 12, 2018

Sunday, July 8, 2018

Wednesday, July 4, 2018

Friday, June 29, 2018

Saturday, June 23, 2018

Monday, June 18, 2018

Monday, June 11, 2018

Tuesday, June 5, 2018

Saturday, June 2, 2018

Friday, June 1, 2018

Thursday, May 31, 2018

Monday, May 28, 2018

Sunday, May 27, 2018

Thursday, May 24, 2018

Monday, May 21, 2018

Saturday, May 19, 2018

Wednesday, May 16, 2018

Monday, May 14, 2018

Sunday, May 13, 2018

Friday, May 11, 2018

Friday, May 4, 2018

Sunday, April 29, 2018

Wednesday, April 25, 2018

Tuesday, April 24, 2018

Saturday, April 21, 2018

Thursday, April 19, 2018

Wednesday, April 18, 2018

Sunday, April 15, 2018

Tuesday, April 10, 2018

Saturday, April 7, 2018

Thursday, April 5, 2018

Saturday, March 31, 2018

Monday, March 26, 2018

Friday, March 23, 2018

Saturday, March 17, 2018

Sunday, March 11, 2018